JAI GO-5100M-PGE, User Manual

Page: 47 / 108

GO-5100MC-PGE | GO-5101MC-PGE | User Manual (Ver. 2.0) Main Functions
- 47 -
Pixel Format Binning Settings Height Width H Period Pack Value Frame Rate (fps)
10 bit / 12bit*
1 x 1 (Full ROI) 2056 2464
26.343 μs 16
11.3
2 x 1 1028 2464 18.1
1 x 2 2056 1232 35.6
2 x 2 1028 1232 35.5
10 bit Packed / 12bit*
1 x 1 (Full ROI) 2056 2464
26.343 μs 12
15.1
2 x 1 1028 2464 30.2
1 x 2 2056 1232 18.1
2 x 2 1028 1232 35.5
The values during [Continuous]
Note: *12-bit binning is not supported.
Caution: Although the maximum frame rate value is determined by the GigE bandwidth range,
when ROI is configured, the frame rate cannot exceed the sensor output's allowable frame rate
value.
Exposure Mode
Related Setting Items: AcquisitionControl
The following exposure modes are available on the camera.
Exposure
Mode
Setting
Exposure Operation
OFF Exposure control is not performed (free-running operation).
Timed
Mode in which control is performed using exposure time. Acquire images using an exposure time
configured beforehand on an external trigger.
Trigger
Width
Mode in which control of the exposure time is performed using the pulse width of the trigger input
signal. The exposure time will be the same as the pulse width of the trigger input signal. This
allows long exposure.
Note: The settings for exposure control and triggers are related to each other. Be sure to
configure the settings described in “ Configure Exposure and External Trigger Settings ”.