― 7 ―
i.
Using the pan, tilt and roll adjustments on the mount, aim the housing at the target.
j.
Loosen the lens adjustment thumbscrews.
k. Adjust the focus, and if necessary the zoom adjustments on the lens to achieve the field of
view you desire. Right click on the image and select
“Preview Image” to get a view of the
entire image.
l.
Readjust the pan, tilt, roll, zoom and focus until satisfied with the field of view and focus.
Figure 4.
Properly adjusted image (dual-lane setup)
m. Tighten lens adjustment thumbscrews.
n. Lock down the pan, tilt and roll adjustments.
o. Remove Ethernet cable from the camera RJ45 and reinstall the cable from the I/O Board
RJ45 into the camera RJ45.
p. Close and latch the lid.