![background image](http://html.mh-extra.com/html/jai/drive5/drive5_installation-manual-and-quick-start-manual_631556022.webp)
― 22 ―
Figure 19. LED Ring-Light selections in EN Setup
-
Manual Light Level: the light level is manually set using the LED Ring-Light Intensity setting.
Values range from 0 (no flash) to 100 (maximum intensity). The selected light level will be
used regardless of ambient light conditions.
-
Auto Light Level: light level can be controlled automatically with the help of ALC. The “LED
Ring-Light
Auto Intensity” settings let you fine tune the light level for various ambient light
conditions (see Figure 20).
Note: additional settings in this camera properties section are for use with an external flash unit such
as JAI’s TNL-50. See the TNL-50 documentation for an explanation of the settings.
Figure 20. LED Ring Light flash mode and auto intensity settings in EN Setup
When Auto Light Level is selected the following settings take effect:
-
LED Ring-Light Auto Intensity Minimum: the lowest light intensity level to which the ALC
(Auto Level Control) will set the LED Ring Light flash intensity.