![background image](http://html1.mh-extra.com/html/jai/ab-800ge/ab-800ge_user-manual_631429085.webp)
AM-800GE / AB-800GE
- 82 -
12.4.2. Setting inputs and outputs
12.4.2.1 Select signal to connect with Line which is selected by Line selector
This function determines which signal is connected with Digital I/O (Line 1 through
Line 8).
The following figure is an example of setting Line 5 –Opt In 1. In this case, Line
Source is the signal to connect with Line 5 -Opt In 1. But Frame Active is available
for only output and accordingly, it is not selectable in the Control tool. Line Format
is automatically set at Opto Coupled.
The following figure is an example of setting output so that the signal output from
Line1 – TTL Out 1is selected from signals in the Line Source. In this case, there is no
selection, OFF.
12.4.2.2 Select Trigger Source
Which signal is used as the trigger signal can be configured by the Trigger Source in
the Trigger Selector of Acquisition Control.
In the following figure, Frame Start is selected as the trigger and the trigger source
is configured Line7 – TTL In 1.
Summary of Contents for AB-800GE
