JAI AB-800GE, User Manual

Page: 57 / 111

AM-800GE / AB-800GE
- 54 -
9.5.6 TimerTriggerSource
The start trigger signal to the timer can be selected from the following list.
①
Off
②
AcquisitionTrigger
③
AcquisitionStart
④
AcquisitionEnd
⑤
FrameTrigger
⑥
FrameStart
⑦
FrameEnd
⑧
Line 1(TTL out1)
⑨
Line 2(TTL out2)
⑩
Line 3(Opt out1)
⑪
Line 4(Opt out2)
⑫
Line 5(Opt in1)
⑬
Line 6(Opt in2)
⑭
Line 7(TTL in1)
⑮
Line 8(LVDS in)
⑯
Timer1End
⑰
Action1
⑱
Action2
9.5.7 TimerTriggerActivation
The timing of the start trigger to the timer can be selected from the following.
RisingEdge
：
The timer starts at the signal rising edge.
FallingEdge
：
The timer starts at the signal falling edge.
9.6. Event Control
9.6.1 EventSelector
The event can be selected from the following list.
AcquisitionTrigger
、
FrameStart
、
FrameEnd
、、
Line1RisingEdge
、
Line1FallingEdge
、
Line2RisingEdge
、
Line2FallingEdge
、
Line3RisingEdge
、
Line3FallingEdge, Line4RisingEdge
、
Line4FallingEdge
、
Line5RisingEdge
、
Line5FallingEdge
、
Line6RisingEdge
、
Line6FallingEdge
、
Line7RisingEdge
、
Line7FallingEdge
、
Line8RisingEdge
、
Line8FallingEdge
9.7.
ActionControl
ActionControl is used to activate the specific functions of multiple cameras on the
same network at the same time. For instance, it can be used to trigger multiple
cameras at the same time.
ActionControl appears as two inputs (Action 1, Action 2) and is connected with 6
Triggers, CounterReset of the counter, CounterTrigger and Timer.
If ActionControl is used, the input source to the trigger should be set to Action 1 or
Action 2 in advance.
9.7.1 ActionDeviceKey
Set the same value to cameras which are operated at the same time.