![background image](http://html1.mh-extra.com/html/jai/ab-800ge/ab-800ge_user-manual_631429038.webp)
AM-800GE / AB-800GE
- 35 -
8.3.2.2 Exposure function in RGB output
After the stream is completed, the next exposure will start.
1,2,3 -------------2471,2472Line
1,2,3 ------------------------2471,2472Line
RGB8_PACKED : 222ms
≒
4.5fps
Fig. 32 Exposure behavior (RGB output)
8.3.3 Note for setting packet size
The packet size is set to 1428 as the factory default. Users may enter any value for the
packet size and the value will be internally adjusted to an appropriate, legal value that
complies with the GenICam standard. The packet size can be modified in the GigE
Vision Transport Layer Control section of the camera control tool.
Regarding data transfer rate, a larger packet size produces a slightly lower data
transfer rate. The AM-800GE and AB-800GE can support a maximum of 16020 byte
packets provided the NIC being used has a Jumbo Frames function with a setting of a
16020 bytes or larger.
Caution: Do not set the packet size larger than the maximum setting available in
the NIC or switch to which the camera is connected . Doing so will cause
output to be blocked.
The usable packet size for each output is shown in the following table.
Output
Usable packet size
8bit
36 + 8 x n 34 ≤ n ≤ 3488
10bit_Packed, 12bit_Packed 36 + 12 x n 31 ≤ n ≤ 320
10bit,12bit
36 + 16 x n 29 ≤ n ≤ 296
RGB 8bit
36 + 24 x n 25 ≤ n ≤ 258
YUV422
36 + 16 x n 29 ≤ n ≤ 296
Exposur
e
S
ensorReadOut Tap1,2
Transfer
Next
Exposur
e
Next
SensorReadOut Tap1,2
Summary of Contents for AB-800GE
