![background image](http://html1.mh-extra.com/html/jai/ab-800ge/ab-800ge_user-manual_631429094.webp)
AM-800GE / AB-800GE
- 91 -
Set the image selected by ROI Index. The following example is Index 0.
Then, the next image is set by Multi ROI Next Index.
The following example is for Index 1.
After that, set the image of Index 1 by Multi ROI Index.
While repeating the above procedure, set the necessary ROI. Maximum of 5 images
can be set. On the last image setting, set “Multi ROI Next Index” to “OFF”.
12.4.5.11 Delayed readout setting
If a system using multiple cameras is configured, it can use delayed readout in order
to improve the traffic in the PC port. Refer to the chapter 8.4.3 The data transfer
for multiple cameras.
Setting:
Trigger selector:
JAI Acquisition Transfer Start
Trigger mode:
ON
This should be applied to all connected cameras.
12.4.5.12 Operate the external strobe light
“Exposure Active” can be used as the strobe driven signal.
Then set “LINE” for signal output.
The following example selects Line 1- TTL Out 1 as the output terminal.
Summary of Contents for AB-800GE
