![background image](http://html1.mh-extra.com/html/jai/ab-800ge/ab-800ge_user-manual_631429061.webp)
AM-800GE / AB-800GE
- 58 -
Minimum trigger interval
Full scan
3166L
1/2 Partial
2546L
2/3 partial
2242L
1/4 Partial
1776L
1/8 Partial
1545L
The above figures are forpixel formats MONO8 or Bayer8.
10.3.
Trigger operation by “TriggerWidth” (Previously called PWC)
In this mode the accumulation time is equal to the trigger pulse width. Here it is
possible to have a long time exposure. The minimum active period of the trigger is 2L
and the minimum trigger interval is shown in the following table.
To use this mode:
Acquisition mode
: Continuous, Single Frame, Multi Frame
Acquisition Frame Count
: Required number (if Multi Frame is selected)
Trigger Selector
: Frame Start
Trigger Mode
: On
Trigger Source
: Select from the pull down menu
Trigger Overlap
: OFF or Read out
Exposure Mode
: Trigger Width
Important notes on using this mode
Trigger pulse width >2 LVAL to <2 seconds
The following table shows minimum trigger interval in Trigger Overlap=Readout
Full scan
2526 L
1/2 Partial
1908 L
2/3 Partial
1602 L
1/4 Partial
1137 L
1/8 Partial
906 L
1/2 V Binning (AM-800GE only)
1264 L
The above figures are for pixel formats MONO8 or Bayer8.
Note: In case on Trigger overlap=OFF, the exposure time is added to the above figures.
Summary of Contents for AB-800GE
