31
EN
3”
3”
3”
3”
Standby
Standby
Manually raising / lowering the fan speed : press briefly
Speed 1
Speed 2
Speed 3
Red LEDs
are flashing in the set mode: the water temperature of the supplied water is too low
(Tw < 28 ̊C).
Blue LEDs
are flashing in the set mode: the water temperature of the supplied water is too high
(Tw > 18 ̊C).
Auto-change-over. The unit starts at the last selected speed(1, 2 or 3), as soon as the water
temperature > 28 ̊C.
Auto-change-over. The unit starts at the last selected speed(1, 2 or 3), as soon as the water
temperature < 18 ̊C.
Enkel bij configuratiecode DPC.BRC62 / DPC.BRC64
Non-condensing cooling possible if water temperature setting is adjusted.
The unit is in standby.
The unit can run at 3 speeds.
Control panel operation :
Press the button until the desired mode is reached (± 3sec).
Summary of Contents for Briza 22
Page 1: ...HANDLEIDING MANUEL ANLEITUNG MANUAL BRIZA 22 JDPC 003...
Page 35: ...NOTES...