USING YOUR STANDARD OVEN
RJGR48 SERIES
operation
Jade ovens are thermostatically controlled, and are
equipped with electric ignition systems. This promotes
accurate temperature control and economical ignition
operation.
Oven Racks
Each Jade oven is equipped with two heavy duty
"wraparound" wire racks. The oven has guides for
three rack positions. When cooking with two racks,
place the racks in the top and bottom rack guides.
When cooking with only one rack, place the rack in the
middle position. The middle position is also ideal for
broiling (see infrared broiling section). When roasting
large items such as a turkey, additional space may be
gained by placing the rack on the bottom of the oven.
Operating The Standard Oven
RJGR48 SERIES
1. Make sure all thermostat knobs are in the off
position.
2. Before heating the oven, place the oven racks in the
desired position.
Warning:
Use extreme caution when moving racks
while the oven is hot. We recommend the use of
oven mittens or potholders to prevent injury.
3. Turn the POWER SWITCH ON. The power switch
will illuminate, and will activate all the thermostats
not set in the OFF position.
4. Push in the oven thermostat and set to a desired
cooking temperature between 150
º
-550
º
F. The
orange bake light will light to indicate the oven is
on. When the desired temperature has been reached,
the orange bake light will go off to indicate the
burner is off. The oven thermostat will cycle on and
off to maintain the desired temperature at a constant
level.
(continued next page)
OFF
ON
POWER SWITCH
OVEN THERMOSTAT
16
