Jadak Photo Research SpectraScan PR-7 Series, User Manual

Page: 85 / 142

Chapter 7
– File Settings
81
Chapter - 7 F
ILE
S
ETTINGS
The File Settings options pertain to accessing the Secure Digital (SD) card installed in the card slot of the PR-
7XX. If no card is inserted in the slot, these options are not available for change and are grayed out. The File
Settings option allows the user to setup the following features:
Note: Up to 1000 measurements can be stored to a single file name.
•
Auto Save
– Allows files to be automatically saved to an SD card (when available).
•
SD File Field - Select measurement file to store measurements to.
•
New File / Rename / Delete measurement files.
•
Save unsaved measurements to SD card on shutdown if measurements exist in RAM.
H
OW TO
A
CCESS THE
F
ILE
S
ETTING
S
CREEN
1.
Touch Menu .
2.
Touch File Settings .
3.
Touch Back to exit to the Main Manu after all options have been selected.
FIGURE 65 - SECURE DIGITAL CARD FILE SETTINGS.
A
UTO
S
AVE
With Auto Save set to ON, measurements are automatically saved to the file name in the SD File field.. Use
the ▼or ▲ icons to toggle between
Auto Save ON or Auto Save OFF .
SD
F
ILE
F
IELD
The SD File field shows the current measurement file name that measurements are being saved to when Auto
Save is enabled, or when a manual Save operation is executed from the measurement result screen..
1.
The ▼or ▲ icons are used to scroll through the available file names until the file of choice appears.
2.
To create a new file, use the function. Refer to the How to Create a New Measurement File
section for information. If no SD card is present the SD File field will show the last accessed file
(grayed out).