Jadak Photo Research SpectraScan PR-7 Series, User Manual

Page: 46 / 142

Chapter 4
– Basic Setup Procedures
42
R
ESET TO
D
EFAULT
Resets all Preferences to their factory default settings. Factory values are:
Parameter Setting
Power Saving Enabled
Brightness and
Contrast
Brightness: 50%
Contrast: 50%
Brightness during measure: 25%
Sounds and Alerts All Enabled
Connectivity High Power
Date and Time US Pac. Coast Date and Time
Units
Measurement Units: Metric
Lum. Intensity: Candelas
RS-232 Connectivity Baud Rate: 115200
Setting the Default Parameters:
1.
Touch Reset to Default from the Preferences menu. The following screen appears.
2.
Touch OK to reset all Preferences or Cancel to exit without making changes.
H
ARD
R
ESET
If the instrument ever becomes unresponsive, perform a hard reset. Press and hold the Power Off (O) and
Measure button simultaneously until the instrument shuts itself off. Upon rebooting, the instrument should
function normally. If not, contact Photo Research for assistance.