Jadak PHOTO RESEARCH SpectraScan PR-655 User Manual Download Page 48

Page: 48 / 160

PR-655/670 User Manual

FIGURE 33

–

EXPOSURE TIME ENTRY SCREEN

Enter the desired exposure time. The range is 3 ms to 6,000 ms for the PR-655 and
6 ms to 30,000 ms for the PR-670.

Note: The sensitivity range must be set to

Extended

to use the maximum value of 30,000 ms

(PR-670 only).

Touch

Back

when done.

ETTING THE

NSTRUMENT

ENSITIVITY

ANGE

(PR-670

NLY

)

The PR-670 has two

Adaptive

sensitivity ranges

–

Standard

and

Extended.

For

Standard

sensitivity, the exposure

time range is 6 ms to 6,000 ms. For

Extended

sensitivity, the exposure time ranges from 6 ms to 30,000 ms thus

extending

the sensitivity. To set the

Sensitivity

range:

Make sure

Adaptive

is set to

Enabled.

Touch the

▼

▲

icon in the

Sensitivity

field to toggle between

Standard

and

Extended.

Summary of Contents for PHOTO RESEARCH SpectraScan PR-655

































































































































































Search results

Summary of Contents for PHOTO RESEARCH SpectraScan PR-655

Reviews:

Related manuals for PHOTO RESEARCH SpectraScan PR-655

Brands by name

Popular brands

Jadak PHOTO RESEARCH SpectraScan PR-655, User Manual

Search results

Summary of Contents for PHOTO RESEARCH SpectraScan PR-655

Reviews:

Related manuals for PHOTO RESEARCH SpectraScan PR-655

Brands by name

Popular brands