Jacuzzi JVS165S, Owner'S Manual

Page: 3 / 32

Page 3 of 32 IS2303VSP3J Rev-A
Table of Contents
1. IMPORTANT SAFETY INSTRUCTIONS 4
2. General Information 7
2.1. Introduction 7
2.2. Product Dimensions 7
3. Energy Efficiency Overview 7
4. Installation and Wiring 8
4.1. Pump Location 8
4.2. Pump Mounting 8
4.3. Pipe Sizing Chart 8
4.4. Plumbing 9
4.5. Electrical 9
4.6. Electrical Specs 9
4.7. Voltage 9
4.8. Grounding and Bonding 9
4.9. Wiring 10
4.10. Remote Control Wiring/Operation 10
4.11. Digital Control Interface Orientation 10
4.12. Interface Wall Mounting 11
4.13. Installation Procedure 13
5. Wiring Diagrams 13
5.1. Input Power Wiring (Required) 13
5.2. Hayward Automation Control Wiring (Optional, for remote control of pump speed) 14
5.3. External Relay Speed Control Wiring (Optional, for remote selection of pump speed) 15
5.4. Wall Mounted Digital Control Interface Wiring (Optional) 16
5.5. Remote Stop Switch Wiring (Optional) 16
6. Startup & Operation 17
6.1. Prior to Start-Up 17
6.2. Starting/Priming the Pump 17
6.3. User Interface Summary 18
6.4. Menu Outline 19
6.5. Initial startup 20
6.6. Configuration Menu 20
6.7. Timer Menu 22
6.8. Preset Speed Setup Menu 23
6.9. Diagnostic Menu 24
6.10. Stop/Resume 24
6.11. Quick Clean 25
6.12. Remote Stop 25
7. Maintenance 25
8. Storage / Winterization 25
8.1. Storing Pump For Winterization 26
9. Shaft Seal Change Instructions 26
9.1. Removing the Motor Assembly 26
9.2. Removing the Impeller 26
9.3. Removing the Ceramic Seat 26
9.4. Seal Installation 26
9.5. Replacing the Impeller and Diffuser 27
9.6. Replacing the Motor Assembly 27
10. Replacement Parts 27
10.1. Parts Diagram 27
10.2. Parts Listing 28
11. Troubleshooting 29
11.1. General Problems 29
11.2. Check System Messages 30
12. Warranty 31
12.1. For warranty information please visit jacuzzipool.com 31
13. Product Registration 31