Jacobsen ZB Series, Safety, Operation And Maintenance Manual

Page: 102 / 134

en-100
8 MAINTENANCE AND LUBRICATION
8.26 MOWER STORAGE CONTINUED _________________________________________
After Storage
• Check and install the battery. If necessary, charge the battery.
• Check or service the fuel filter and air cleaner.
• Check the radiator coolant level.
• Check the level of engine oil and hydraulic fluid.
• Fill the fuel tank with fuel. Bleed the fuel system.
• Make sure the tyres are correctly inflated.
• Remove all oil from the blades. Adjust the cutting height.
• Start the engine at 1/2 throttle. Allow the engine to become warm and lubricated.
8.27 LUBRICATION OF CUTTING UNIT_________________________________________
Wing pivot arm (A) and Gimbal (B)
Front pivot arm (C)
WARNING
Never operate the engine without enough ventilation or in an enclosed area.
The carbon monoxide in the exhaust fumes can increase to dangerous levels.
A
B
C