Jacobsen ZB Series, Safety, Operation And Maintenance Manual

Page: 41 / 134

en-41
5 CONTROLS
5.2.Z.52 DRIVE MODES ____________________________________________________
Select to shows Drive Modes.
Press the button up and down to move
between Auto Mode Selectable, Manual Mode
Selectable or Creep Mode Selectable . To
accept.
Press the button up and down to move
between Yes and No Selectable . To accept.
5.2.Z.53 FAN DRIVE ______________________________________________________
Select the Fan Drive

and accept .
The normal fan operation is based on engine
temperature. Fan will engage as the temperature
increases.
When engine temperature exceeds a set value or
timer ends, the reverse fan cycle will start. Fan will
stop the forward rotation, operate in reverse
rotation for 10 seconds and return to forward
rotation. Timer will automatically restart after each
reverse fan cycle.
To prevent reverse fan rotation select

OFF and select . To accept .
To use manual start the reverse fan cycle, select

Manual and select . To accept.
Press the and – to increase or decrease Timer Set-Up. Select . To accept.
5.2.Z.54 BRIGHTNESS ADJUST _____________________________________________
Use the buttons below the + and - icons on the screen to increase and
decrease the brightness.
WARNING
The reversing fan can start unexpectedly whilst the engine is running, always make sure that the
correct PPE is worn whilst cleaning or during routine maintenance of this vehicle.
Keep hands and loose-fitting garments away from the reversing fan at all times.
%
0 100
+ -
+ -
Brightness
Drive Modes
Auto Mode Selectable YES
Manual Mode Selctable
No
Creep Mode Selectable Yes
Pin Menu
Cruise Control
Cross Cut
Vehicle Speed
Change PIN
Inclinometer
Set Default Parameters
Drive Modes
min
- +
-
+
Fan Drive Menu
30 20 Sec
Timer Set-Up (min) Output Time (sec)
Pin Menu
History Dealer Login
Reset PIN (Dealer)
History Service Login
Reset PIN (Service)
History Jacobsen Login
Automatic Control
Fan Drive
Fan Drive Active