en-46
5 CONTROLS
A
B
A
5.2.Z.1
WARNING MAXIMUM SLOPE ANGLE EXCEEDED _______________________
When this screen is shown, the maximum permitted slope angle has been
exceeded.
Press the button below the
to confirm the fault.
5 3.
TRACTION PEDAL ___________________________________________________
The traction pedal is found on the right side of the footplate.
•
Carefully press the top (A) of the foot pedal to reach the forward
speed that you need.
•
To stop - Carefully return the foot pedal to the Neutral position.
•
To move in the reverse direction press the bottom (B) of the foot
pedal.
5 4.
STEERING TILT CONTROL ____________________________________________
Tilt the column backward or forward to the correct position. Release the
small foot pedal to lock the steering column in position.
5 5.
HORN _____________________________________________________________
The horn button is on the control panel. If the lighting kit is fitted, the horn is
also found on the end of the indicator stalk (Section 5.10).
1
0°
Slopes > = 25°
in either x or y
Summary of Contents for ZB Series
