Jacobsen R311T-T4I, Safety, Operation And Maintenance Manual

Page: 8 / 126

2 SPECIFICATIONS
en-8
2 SPECIFICATIONS
2.1 PRODUCT IDENTIFICATION _________________________________________________
69177 .............................. R311T-T4I with folding ROPS.
Serial Number ................ An identification plate, like the one
shown, listing the serial number, is
attached to the frame of the
mower near the center lift arm
mount.
Always provide the serial number of the unit when ordering
replacement parts or requesting service information.
2.2 ENGINE__________________________________________________________________
Make ............................... Kubota
Model .............................. V2403-M-T-E3B
Horsepower .................... 59 hp (44 kW) @2600 rpm
Note: Actual sustained horsepower will likely be lower
than listed in specifications due to operating limitations
and environmental factors
Displacement .................. 148 cu. in. (2434 cc)
Bore and Stroke .............. 3.43 x 4.03 in. (8.7 x 10.24 cm)
Compression Ration ....... 23.8:1
Torque ............................. 120.7 ft. lbs. (163.6 Nm) @ 1800
rpm
Fuel:
Type .......................... No. 2 Low or Ultra Low Sulfur
Diesel
Rating ....................... Min. Cetane rating 45
Capacity .................... 20 U.S. Gal. (75.7 liters)
Fuel Injection Pump........ Bosch K type Mini Pump
Ignition Timing ................ 19° before TC
Governor......................... Centrifugal ball mechanical
Low Idle ................... 900 RPM
High Idle ................... 2850 RPM
Lubrication:
Capacity.................... 10 quarts (9.5 liter) with filter
Type.......................... 10W30
API Classification ..... CJ-4
Air Filter .......................... Dual element dry type with
evacuator valve and service
indicator
Alternator ........................ 45 amp
Cooling System .............. Liquid Cooled
Capacity...................... 8 qt. (7.6 l) 50/50 water / ethylene
glycol mix
Thermostat ............... 185° F (95° C)
2.3 MOWER _________________________________________________________________
Tires:
Front ......................... 26 x 12-12, 6 Ply
Rear .......................... 23 x 10.5-12, 4 Ply
Pressure:
Front ......................... 16-20 psi (1.10-1.38 BAR)
Rear .......................... 12-14 psi (0.83-0.97 BAR)
Battery:
Type .......................... 12 Volt Lead/Acid
Group ........................ AABM #75NF
Rating ....................... 750 CCA at 0° F (-18° C)
Service Brake ................. Dynamic braking through traction
circuit.
Parking Brake ................. Integrated in wheel motor,
hydraulic release
Speed:
Forward (2WD) ........ 0 - 14.9 mph (0 - 24.0 km/h)
Forward (4WD) ......... 0 - 7.8 mph (0 - 12.5 km/h)
Mow .......................... 0 - 7.7 mph (0 - 12.4 km/h)
Reverse .................... 0 - 6 mph (0 - 9.6 km/h)
Hydraulic System:
Capacity.......................... 17 U.S. gal. (64.3 liters)
Fluid Type ....................... 10W30
Return Filter.................... Full Flow 10 micron
Charge Filter................... Full Flow 10 micron
Steering ......................... Power steering, rear wheels
Mower Lift ....................... 3 spool manual valve and single
acting cylinders
PTO Drive....................... Fixed Flow Hydraulic
11524 WILMAR BLVD,
CHARLOTTE, NC 28273
®
kg kW
1-800-848-1636 (US) PRODUCT OF U.S.A.
A Textron Company
1855 44 XXXX
69177001651