7 OPERATION
37
7.2
INTERLOCK SYSTEM ______________________________________________________
The Interlock System prevents the engine to start unless the parking brake switch is in the ON position, the traction
pedal is in the NEUTRAL position and the PTO switch is in the OFF (Down) position. The system stops the engine if the
operator leaves the seat with the PTO switch in the ON position, traction pedal out of the NEUTRAL position or the
parking brake switch in the OFF position.
Do each of these tests to make sure the Interlock System operates correctly. If any of the tests fail, stop the test and
have the system inspected and repaired as shown below:
•
The engine does not start during test 1
•
The engine does start during tests 2, 3 and 4
•
The engine continues to run during tests 5 and 6
Refer to the chart below for each test and follow the check (
4
) marks across the chart. Turn off the engine between
each test.
TEST 1: The test shows the normal engine start procedure. The operator is in the seat, parking brake switch is in the
ON position, the traction pedal is in the NEUTRAL position and the PTO switch is in the OFF (down) position. The
engine will start.
TEST 2: The engine must not start if the PTO switch is in the ON position.
TEST 3: The engine must not start if the parking brake switch is in the OFF position.
TEST 4: The engine must not start if the traction pedal is out of the NEUTRAL position.
TEST 5: Start the engine with the normal procedure. Turn on the PTO switch and lift your weight off the seat. The
engine must stop. The cutting unit reels must not rotate after seven (7) seconds.
TEST 6: Start the engine with the normal procedure. Turn off the parking brake switch and lift your weight off the seat.
The engine must stop. The cutting unit reels must not rotate after seven (7) seconds.
WARNING
Do not operate the equipment with the Interlock System disconnected or the system does not operate correctly. Do
not disconnect or prevent the operation of any switch.
Test
Operator Seated
PTO Switch OFF
Parking Brake
Switch ON
Traction Pedal in
Neutral
Engine Starts
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
1
4
4
4
4
4
2
4
4
4
4
4
3
4
4
4
4
4
4
4
4
4
4
4
5
4
H
4
H
4
4
H
6
4
H
4
4
H
4
H
H
Start the engine with the normal procedure, move position of the switch and lift your weight off the seat.
The engine must stop immediately and the cutting unit reels must not rotate after seven (7) seconds.
!
Summary of Contents for LF550-H-T4F
Page 13: ...SPECIFICATIONS 4 12 K J C G E L A B H F D ...
Page 86: ...13 NOTES 85 13Notes ...
Page 87: ...NOTES 13 86 ...