Jacobsen HR 5111, Parts And Maintenance Manual

Page: 7 / 247

PRE-DELIVERY CHECKLIST
GB-5
TEXTRON TURF CARE AND SPECIALTY PRODUCTS
4 PRE-DELIVERY CHECKLIST
4.0 PRE-DELIVERY CHECKLIST __________________________________________________
Product Nos. 69116/69129-HR-5111 Turf Mower
Product No. ___________________________________
Tractor
Check;
❑
Wheel lug torque:
__ Front 100-120 ft. lb. (135-162 Nm)
__ Rear 40-50 ft. lb. (54-68 Nm)
❑
Tire Pressure should be:
__ Front 16-20 psi (110-138 kPa)
__ Rear 8-10 psi (55-69 kPa)
❑
Parking brake adjustment
❑
Brake pedal free travel
❑
Hydro Linkage neutral centering adjustment
(unit must not creep in neutral)
❑
Reverse speed adjustment
❑
Hydro pedal stop adjustment
❑
Steering function & adjustments
Engine
Check;
❑
Engine oil level
❑
Engine coolant level
❑
Air cleaner element and connections
❑
Fan belt adjustments
❑
Fuel shut-off solenoid linkage for adjustment and
alignment
Hydraulic System
Check;
❑
Hydraulic oil level
❑
Pinched or rubbing hoses
❑
Twisted or crimped hoses
❑
Oil Leaks
❑
Hydro tow valve is in “Drive” position
Serial No. ____________________________________
Electrical System
Check;
Interlock switch function
__ Parking brake switch
__ Implement control PTO switch
__ Three mower limit switches
__ Seat switch
❑
4WD travel pedal switch adjustment
❑
Cruise control brake pedal cut-out switch
❑
Dash panel gauges and warning lights
❑
Pinched or rubbing wires
Cutting Units
Check;
❑
Adjust cutting height to customer’s specifications
❑
Blades are in proper locations (left or right rotation)
❑
Blade mounting bolt torque
__ Center (adapter) bolt: 75 ft. lb. (102 Nm)
__ Blade Bolts 35-40 ft. lb. (47-54 Nm)
❑
Front deck adjustment
❑
Decks pivot freely on mounting pins
❑
Adjust weight transfer (ground pressure) valve
Miscellaneous
Check;
❑
Look for loose or missing hardware
❑
All lubrication points
❑
Examine paint finish; touch up where necessary
❑
Check decals; In correct position and legible
❑
Make sure all owner’s manuals are in the pouch
❑
__________________________________________
❑
__________________________________________
Should you encounter any areas that require repair during set-up, please explain below and fax a copy of the checklist
and the problem description to us.
Problem Description ___________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
Distributor_____________________________________
Customer _____________________________________
Inspected by __________________________________
Date ________________________________________