Jacobsen HR 5111, Parts And Maintenance Manual, Page: 8 / 247

LUBRICATION
GB-6
TEXTRON TURF CARE AND SPECIALTY PRODUCTS
5 LUBRICATION
5.0 TRACTOR _________________________________________________________________
Before you clean, adjust, or
repair this equipment,
disengage all drives, lower implements to the
ground, engage parking brake, stop engine and
remove key from ignition switch to prevent
injuries.
IMPORTANT:
All maintenance intervals must be performed more
frequently when operating in extremely dusty conditions.
1. Always clean grease fittings before and after lubricat-
ing.
2. Lubricate with grease that meets or exceeds NLGI
Grade O specifications. Apply grease with a manual
grease gun and fill slowly until grease begins to
seep out. Do not use compressed air guns.
3. For smooth operation of pivot points and other fric-
tion points, apply several drops of SAE 30 wt. oil
every 40 hours or as required.
! WARNING
Front
1
2
3
4
5
(2 Fittings)
6
7
8
1
9
TRACTOR FRAME
Description Fittings
1. Spindle housing steering axle (2)
2. Steering axle pivot (1)
3. Tilt steering column (1)
4. Brake pedal pivot (1)
5. Pump drive shaft (2)
6. Pump spline (1)
7. Axle drive shaft (2)
8. Shaft spline (1)
9. Wing Mower Lift Cylinders (4)