SET-UP 3
9
3.4
TORSION SPRINGS ________________________________________________________
1.
Slide one clamp
(F)
over each lift arm and secure
with 5/16-18 x 1-1/4” carriage bolt and 5/16-18
locknut
(G and E)
. Do not tighten.
2.
Slide the right
(J)
and left
(H)
torsion spring over
their respective lift arms. Insert end of springs
between clamp ends.
3.
Slide swivel housing
(B)
onto the lift arm and secure
housing with pin
(C)
. Hook ends of torsion spring
over pin
(C)
.
Figure 3B
3.5
ANTI-SWAY SPRINGS ______________________________________________________
1.
Assemble one 1/2-13 hex jam nut
(L)
onto rod
(M)
then secure the rod to the bottom rear of frame with
1/2” lockwasher and 1/2-13 jam nut
(K)
.
2.
Assemble anti-sway spring to adjusting rod and then
the rear lift yoke.
3.
Adjust anti-sway spring.
[Section 4.7]
Figure 3C
3.6
GRASS CATCHERS ________________________________________________________
Install by hanging catcher hooks on mower lift yoke and
letting catcher hang by its own weight.
Adjust as described in sheet included with grass catcher.
Figure 3D
G
F
E
B
C
H
J
K
L
M
Summary of Contents for Greens King IV 62302
Page 23: ...NOTES 7 23 7 NOTES...
Page 24: ...7 NOTES 24...
