ADJUSTMENTS 4
19
4.17 CHOKE CONTROL _________________________________________________________
1.
Push choke control knob to the OFF Position.
2.
Set Choke lever at carburetor to OFF (butterfly
open) position.
3.
Adjust control wire (at the carburetor) then clamp
wire housing in place while keeping choke butterfly
open and the control knob in the OFF position.
4.18 SPECIFIC TORQUE REQUIREMENTS _________________________________________
1.
Ball joints: 30 - 35 ft. lb. (40.5 - 47.2 Nm).
2.
Bedknife shoe: 25 - 37 ft. lb. (34 - 50 Nm).
3.
Brake drum and hub to wheel motor: 90 - 100 ft. lb.
(122 - 135 Nm).
4.
Wheel mounting hardware 65-85 ft. lb. (88 - 115
N.m). Check and retorque daily until torque is
maintained.
5.
Rear steering pulley: 50 - 60 ft. lb. (67.5 - 81 Nm).
6.
Engine drain plug 22 ft. lb. (29.7 Nm).
7.
ROPS:
ROPS Bracket to Frame: 40ft lb. (54.2 Nm)
ROPS Tube to Bracket: 75 ft. lb. (101.7 Nm)
ROPS Tube Plates: 30 ft. lb. (40.7 Nm)
Summary of Contents for Greens King IV 62302
Page 23: ...NOTES 7 23 7 NOTES...
Page 24: ...7 NOTES 24...
