Jacobsen ECLIPSE 360, Safety, Operation & Maintenance Manual

Page: 132 / 148

B
en-132
Safety, Operation, & Maintenance Manual
LDU ERROR CODES
Lithium
Signal2 Offset Out of Range:
The adapted offset is too high or too
low.
SIN COS Sensor Not Connected:
Check that the unit circle vector is
constant. The system will detect a
broken signal even if the motor is not
rotating.
Speed Error:
The speed calculated from the
sensor signals is not valid.
High Side Output Low:
The high side output has been
detected to be low. This indicates a
short circuit to B-.
High Side Output High:
The high side output has been
detected to be high. This indicates a
short circuit to B+.
High Side Output Not Connected:
The system detected that nothing is
connected to the high side output.
High Side Switch SHC Supervision:
A short circuit of the high side switch
controlled by the supervision CPU
was detected. This indicates a
hardware failure.
High Side Switch SHC Main:
A short circuit of the high side switch
controlled by the main CPU was
detected. This indicates a hardware
failure.
High Side Plausibility Error:
An internal high side failure was
detected. This indicates that the high
side output is not producing the
expected voltage.
Signal1 Amplitude Out of Range:
The adapted amplitude is too high or
too low.
LDU Error Code Description
Caution
LED
Alarm
Sound -
ing
Engine
Stop
Traction
Stop
Mow Stop
On Off Yes No Yes No Yes No Yes No
STEERING
FAULT F093
STEERING
FAULT F094
STEERING
FAULT F095
STEERING
FAULT F0A1
STEERING
FAULT F0A2
STEERING
FAULT F0A3
STEERING
FAULT F0A4
STEERING
FAULT F0A5
STEERING
FAULT F0A6
STEERING
FAULT F0B0