B
OPERATION
en-45
Safety, Operation, & Maintenance Manual
Lithium
OPERATIONS
DAILY INSPECTION __________________________________________________
1. Perform a visual inspection of the entire unit, look for signs of wear, loose hardware, and missing or damaged com
-
ponents. Check for fuel or oil leaks to ensure connections are tight and hoses and tubes are in good condition.
2. Make sure all mowers are adjusted to the same cutting height.
3. Check tires for proper inflation.
4. Test the Interlock System.
NOTICE: For more detailed maintenance information, adjustments and maintenance/lube charts, see the
Parts & Maintenance manual.
INTERLOCK SYSTEM ________________________________________________
1. The Interlock System prevents the mower from starting unless the operator is in the seat, mow switch is OFF, and
the traction pedal is in Neutral. The system also disables the mow, traction, and steering functions without the oper
-
ator in the seat.
2. Perform each of the following tests to insure the Interlock System is functioning properly. Stop the test and have the
system inspected and repaired if any of the tests
fail
as listed below:
•
l
the system
does not
start in test 1;
•
l
the system
does
start in test 4;
•
l
the traction function
is not disabled
in test 3;
•
l
the mow, traction, and steering functions
are not disabled
during test 2 and 5.
3. Refer to the chart below for each test and follow the check (
4
) marks across the chart. Shut engine off between each
test.
a.
Test 1:
Represents normal starting procedure. The operator is seated, mow switch is OFF, and the traction
pedal is in Neutral. The mower should start.
b. Test 2: The mower must start with mow, traction, and steering functions disabled if operator is not in the seat.
c.
Test 3:
The mower must start with traction function disabled if the traction pedal is not in Neutral. Traction func
-
tion will be disabled until traction pedal is returned to Neutral.
d.
Test 4:
The mower must not start if the mow switch is ON.
e.
Test 5:
Start the mower in the normal manner then lift your weight off the seat. Mow, traction, and steering func
-
tions should be disabled until operator sits back in seat.
CAUTION
The daily inspection should be performed only
when the system power is off. Turn mow switch
OFF, lower reels to the ground, turn system power
switch to OFF position, and remove the key.
WARNING
Never operate equipment with the Interlock System
disconnected or malfunctioning. Do not disconnect
or bypass any switch.
!
!
Summary of Contents for ECLIPSE 360
