Jacobsen ECLIPSE 360, Safety, Operation & Maintenance Manual

Page: 134 / 148

B
en-134
Safety, Operation, & Maintenance Manual
LDU ERROR CODES
Lithium
Stepper Signal2 High:
The filtered stepper signal1 is above
4000mV.
Stepper Signal2 Low:
The filtered stepper signal1 is below
1000mV.
Ch A Signal Loss:
The sensor signal is suddenly lost.
Ch A Low Update Rate:
The sensor update rate is
considered to be too low.
Ch A FIFO Overrun:
The first in first out buffer was full.
Ch B Signal Loss:
The sensor signal is suddenly lost.
Ch B Low Update Rate:
The sensor update rate is
considered to be too low.
Ch B FIFO Overrun:
The first in first out buffer was full.
Wrong AB Difference:
The angle difference between
channel A and B was larger than 90°.
LDU Error Code Description
Caution
LED
Alarm
Sound -
ing
Engine
Stop
Traction
Stop
Mow Stop
On Off Yes No Yes No Yes No Yes No
STEERING
FAULT F0D2
STEERING
FAULT F0D3
STEERING
FAULT F0E0
STEERING
FAULT F0E1
STEERING
FAULT F0E2
STEERING
FAULT F0E4
STEERING
FAULT F0E5
STEERING
FAULT F0E6
STEERING
FAULT F0E7