第 3页共 10 页
Key FunctionsS/L mark Key Name Description
Key
Name
Description
Stitch length
adjustment key
1. Short press the “+” key, and the stitch length increases by 0.1mm each time. Long press the “+”
key, and the stitch length continues to increase.
2. Short press the “-” key, and the stitch length decreases by 0.1mm each time. Long press the “-”
key, and the stitch length continues to decrease.
Front
reinforcing
sewing key
Front reinforcing sewing selection key. Short press it once to switch between Front Reinforcing
Sewing
, Front Double-reinforcing Sewing
, and Off. The corresponding LCD screen icon
lights up. Select the corresponding key to set the stitch count in segments A and B. The range of
stitch count 1~F corresponds to 1~15 stitches.
Rear
reinforcing
sewing key
Rear reinforcing sewing selection key. Short press it once to switch between Rear Reinforcing
Sewing
, Rear Double-reinforcing Sewing
, and Off. The corresponding LCD screen icon
lights up. Select the corresponding key to set the stitch count in segments C and D. The range of
stitch count 1~F corresponds to 1~15 stitches.
The needle
Stop
button/Presser
foot
If clicked, switch the stop position of the sewing machine (upper stop position/lower stop position).
If long pressed, toggle the presser foot function on or off.
The trajectory
of key
If click, switch the current sewing track (1-4 cycle switch), track description:
Track 1: standard track to reduce fabric sliding;
Trajectory 2: improve the winding line to prevent wrinkles;
Trajectory 3: Reduce broken needles and weaken the thread;
Track 4: Thick sewing, good feeding.
Power-on voice
message and
voice on/off key
Without error warning:
1. Short press
key: The power-on voice is disabled. Short press again to enable the power-on
voice.
2. Long press
key: The voice function is disabled. Then, long press again to enable the voice
function.
With error warning: Short press
key to broadcast the error code solution directly.
Free sewing
and trimming
key
1. Short press
key to select free sewing mode.
2. Long press
key, the thread trimming icon
on the LCD screen lights up, and the thread
trimming function is enabled. Long press
key again to disable the thread trimming function.
Lock sewed
If clicked, set the use of front lock, front lock, rear lock or cancel the front lock.(The function of
locking the needle is to sew tightly)
Pattern sewing
key
Short press
to switch between Pattern Sewing Mode and Pattern Sewing Editing.
W bar tacking
/Multi-section
constant-stitch
1, Short press
key, the icon
of LCD is lit, W seam marking function turns on.
2, Long press
key, the icon
of LCD is lit, the multi-section constant-stitch sewing
function turns on.
