江淮汽车 部门：客户服务部
Mechanical Part of
Engine
2)
Fuel Guide Rail
■
Check the fuel inspection hole for damage and jamming. If any, please replace.
■
Check if there is residuum in guide rail. If any, please clean.
3.
Installation
1)
Be aware of following precautions when mounting new O-ring on fuel injector.
■
As the upper and lower O-rings are different, do not confound them.
Fuel pipe side: thick one
Nozzle side: thin one
■
Please mount the O-ring by your hands.
■
Lubricate the O-ring with petrol.
■
Do not wash O-ring with solvent.
■
Verify that there is no foreign substance on O-ring and its matching part.
■
Make sure the O-ring will not be scraped by tool or fingernail, and it is not distorted or stretched
during installation.
■
Insert new O-ring into fuel injector straightly.
Do not deflect or distort it.
2)
Mount fuel injector
④
on fuel pipe
①
with
following steps.
③
: thick one
⑤
: thin one
a.
Insert the snap
②
into the fixing groove on
fuel injector. Insert the snap slice D into raised
position F of fuel injector.
Attention:
■
Replace with the new snap every time.
■
Make sure there is no interference between the snap and O-ring.
b.
Insert fuel injector into fuel pipe where snap has been mounted.
Attention:
■
Make sure the direction of insertion aligns with the axis.
■
Insert the snap slice C into the raised position B of fuel pipe.
■
Make sure the flange A of fuel pipe is properly mounted in the fixing groove on snap flange.
Fig. 1.4.005
