江淮汽车 部门：客户服务部
Mechanical Part of
Engine
3.
Dismantlement of Related Elements in Engine Compartment
①
Disconnect the following pipelines and put them aside.
Attention:
Use plugs to prevent leakage when disconnecting the pipelines.
■
Inlet pipe of fuel injector. See “Fuel Injector”.
■
Vacuum hose of braking vacuum booster on engine side. See “Braking Vacuum Booster”.
■
PVC hose. See “Fuel Evaporation Control System”.
■
Oil inlet pipe joint of clutch. See “Hydraulic Pipeline of Clutch”.
■
Oil inlet pipe and oil return pipe of power steering pump; fixing support of oil pipes. See “Power
Steering Pump”.
■
Low and high-pressure pipes of air compressor. See “Air Compressor”.
②
Dismount the steering fluid reservoir.
③
Dismantling of shifting cable.
④
Disconnect the wire harness connectors and buckles of the following parts and then take them
away:
■
Oxygen sensor
■
Engine coolant temperature sensor
■
Crankshaft position sensor
■
Camshaft position sensor
■
Speed sensor
■
VVT oil control valve harness
■
Throttle opening sensor
■
Absolute intake pressure sensor
■
Ignition coil
■
Fuel injector
■
Knock sensor
■
Generator
■
Starter
■
Air conditioner switch
4.
Dismantlement of Components of Chassis
①
Dismount the front drive shaft. See “Front Drive Shaft”.
②
Dismount the front exhaust pipe. See “Exhaust System”.
