江淮汽车 部门：客户服务部
Mechanical Part of
Engine
2)
Make sure that all engine suspensions have been properly fixed. Then, tighten the nuts and bolts.
8. Check after Installation
1)
Check for any leakage.
The steps for checking oil and fluid leakage, lubricating oil leakage and the exhaust leakage are as
follows:
■
Before starting engine, check oil and fluid levels (including engine oil and coolant). Refill to specified
level as required..
■
Check for fuel leakage with following steps
：
-
With ignition switch turned to the “ON” position, check whether there is fuel leakage at the
connecting positions.
-
With engine started, recheck whether there is fuel leakage at the connecting positions during engine
increasing.
■
During running of engine, check for any abnormal noise and/or vibration.
■
With engine warmed up, verify that there are no leakage of fuel, exhaust gas or other oil and liquid
(including engine coolant and oil).
■
Bleed air and replenish by using specified ports and hoses.
■
After engine cooled down, recheck oil and liquid levels (including engine oil and coolant). If
necessary, refill them to the specified levels.
2)
General of Check Items
List of Leakage Check Items
Item
Before Startup
During Engine
Operation
After Engine
Stopped
Engine coolant
Level
Leakage
Level
Engine oil
Level
Leakage
Level
Transmission oil, brake fluid, power steering
fluid and clutch fluid
Level
Leakage
Level
Fuel
Leakage
Leakage
Leakage
Exhaust
—
Leakage
—
