9
Buttons that shall not be removed for this setup:
Depending on customer feature needs.
Example: If customer have loopback feature, than button one is required.
Button State for Multicast Mode: HDMI Extender:
Default Mode will be highlighted in GREEN
* Item will be described in Descriptions
Multicast Digital
Button State
Transmitter
Receiver
Button One:
Button Two:
Button One:
Button Two:
Short Press
Remote/Loopback*
Video Mode/
Graphic Mode*
Link on: Link
Link off: Unlink
Video Mode/
Graphic Mode*
Long Press (3 sec)
Snoop (on/off)*
Anti-Dither
(1/2/off)
USB Link (on/off)
Anti-Dither
(1/2/off)*
Short Press when
Ethernet Link is Off
BYPASS
BYPASS
BYPASS
BYPASS
Long Press when
Ethernet Link is Off
BYPASS
Ethernet Jumbo Frame
(on/off)*
BYPASS
Ethernet Jumbo Frame
(on/off)*
Long Press on Boot
(Press until Red LED Blinking)
Engineering Mode*
Use Loopback EDID
(>A1.2)*
Engineering Mode*
Update EDID*
Long Press on Boot
(Press until
Red LED and
Green LED Blinking)
Engineering Mode and
Reset to default*
N/A
Engineering Mode
and
Reset to default*
N/A
Summary of Contents for JTECH-VW-4KPR
