J-Tech Digital JTECH-VW-4KPR, Operation Instructions Manual

Page: 6 / 40

6
5.2 Receiver
1) Power input port 2) Power input indicator 3) USB
4) HDMI output 5) Ethernet port 6) Fiber In
7) Indicator of status 8) IR-RX port 9) IR-TX port
10) RS232 port
11) Normal: For serial over IP;
Program: For serial control or getting the debug information
12) 4 bit Dip switch 13) Group Switch 14) Button 1 & 2
A. Green LED: Link LED, when the connection has established over
Cat5e/6 cable or Fiber cable, the Green LED will illuminate.
B. Yellow LED: When the yellow LED is blinking, it indicates the conne
ction has been established over Cat5e/6 cable.
When the green LED illuminates, it indicates the connection has bee
n established between transmitter and receiver over fiber cable.
After select the DIP switch, press “Group Switch” button for 1
second.
Please refer to 5.3.
4 bits DIP Switch:
Use 4bits DIP switch to select 16 group ID (such as 0001, 0010, 0101 etc)