background image

MOBILE M2M

User Manual 

This is a CONSUMER device.

BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and 

have your provider’s consent. Most wireless providers consent to the use of signal 

boosters. Some providers may not consent to the use of this device on their network. If 

you are unsure, contact your provider.

You MUST operate this device with approved antennas and cables as specified by the 

manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person.

You MUST cease operating this device immediately if requested by the FCC or a 

licensed wireless service provider.

WARNING. E911 location information may not be provided or may be inaccurate for 

calls served by using this device.

Warranty: 

3 Year on manufacturing defects. Does not include misuse or customer damage.  

Original Bill of Sale is required for all Warranty Claims

Summary of Contents for MOBILE M2M

Page 1: ...ou MUST operate this device with approved antennas and cables as specified by the manufacturer Antennas MUST be installed at least 20 cm 8 inches from any person You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider WARNING E911 location information may not be provided or may be inaccurate for calls served by using this device Warranty 3 Y...

Page 2: ...othalker FCC approved part numbers listed below visit smoothtalker com APPROVED EQUIPMENT LIST Extension Cables Magnetic base Antennas Thru hole Antennas ACX100 ACX900 SEMRCBXmaXfe10 SEMRCBXmaXfe20 SEMRCBXmaXfe30 SEMRCBXmaXfe40 SEMRCBXmaXfe50 SEMRCBXmaXfe60 SEMiniX1 SEM2M series SEM11M series SEM14M series SEM2LGM series SEM11LGM series SEM14LGM series SEM26LGM series SEM2LGML series SEM11LGML ser...

Page 3: ...1 Installation Assembly Connect the cellular devise the outside antenna and power supply to the booster Please make sure to connect each item to the correct ports as indicated on the booster 2 Placement Connect the booster as shown in Fig 1 and Fig 2 Important Use only the power supply included with the booster Connecting any other power supply at any time will result in damage to the booster and ...

Page 4: ...represents a 3dB reduction two flashes represents a 6dB reduction etc until the total gain of the booster has been suppressed Causes of Flashing Green LED Lights 1 If the outside antenna is located too close to the internal antenna or phone holder the booster will reduce its gain in order to suppress any oscillation feedback loop and the Green LED will flash To achieve higer gain or max gain furth...

Reviews: