J.Sikora – Standard MAX Turntable Manual
22
© 2021 Notable Audio Products | www.notableaudio.com
9.
Mount the Drive Belts
9.1.
Add First Belt for Secondary (Left Motor)
The Secondary Motor, on the left side of
the Chassis, is slightly lower in height
than the Primary
Motor to the right of
the Platter. So, you must place the Belts
on the Secondary Motor first.
Motor with Pulley
Take one of the belts and stretch it over
the Platter and into the lower groove of
the Secondary Motor’s Pulley.
Adding first Belt
or
View setup videos on the product’s Web Page:
https://notableaudio.com/j-sikora-standard-turntable/
9.2.
Locate Any Twists in Belt
J.Sikora uses square belts for improved
strength and stability. Because the Belts
are square, they can become twisted
when you place them on the Platter. In
order for the Table to work optimally,
you must remove all the twists from the
Belts so that they lay flat against the
Platter.
Twist in Belt
Upper Belt
Groove
Lower Belt
Groove
