J.Sikora – Standard MAX Turntable Manual
17
© 2021 Notable Audio Products | www.notableaudio.com
6.
Place the Platter
In this step, you will install the Platter.
6.1.
Align the Platter
Carefully align the opening in the middle
of the Platter with the Bearing. It is
important that you avoid touching the
Bearing and Spindle with the Platter.
It can be helpful to have one person
guide the Platter from below while the
other person lowers the Platter.
Carefully Align Spindle and Hole in Platter
or
View setup videos on the product’s Web Page:
https://notableaudio.com/j-sikora-standard-turntable/
6.2.
Lower the Platter
Gently place your platter over the
Bearing and Spindle. Be careful not to
get your fingers caught between the
Platter and the Sub-Platter.
Check to see that the Platter spins
freely, without any resistance by
rotating the Platter by hand.
If there is any resistance, repeat the
above process.
Platter Seated on Chassis
Warning! The Platter is very heavy and it is easier to place with two people.
