J.Sikora – Standard MAX Turntable Manual
11
© 2021 Notable Audio Products | www.notableaudio.com
You will mount the Second Arm Tower
by sliding the notched Insert of the Arm
Tower over the Chassis’ Plinth. The Arm
Tower is held in place by two set screws
underneath the Arm Tower. You will
need to loosen the screws for the Arm
Tower to slide over the corner
Insert that Slides onto the Chassis’ Plinth
Screws for Securing Arm Tower, shown from the bottom
Slide the Arm Tower directly over the
back-left corner of the Chassis Plinth.
Slide Tower over Corner
Play Video of Adding 2nd Tower
or
View setup videos on the product’s Web Page:
https://notableaudio.com/j-sikora-standard-turntable/
Mount for
Armboard
Insert for
Chassis
Set
Screw
Set
Screws
