23
EN
PG-300
• Turn the groomer off and remove the hair
comb often to blow and/or shake out hair
that has accumulated.
REMEMBER
: You must reset the hair
length selector back to your desired
setting every time you replace the hair
clipping comb to the appliance.
Contouring Without the Hair
Clipping Comb Attachment
• Remove the hair comb from the full width
trimmer located on the maim body of the
appliance.
• Be careful when you are clipping without
comb attachment as when the appliance is
turned on it will trim every hair it touches.
• Tilt the appliance in such a way that only
one edge of the trimming attachment
touches the hair ends when you shape the
contours around the ears (Fig. 4).
Fig. 4
• To control the nape of the neck or hairline,
turn the appliance and hold it with the
trimming attachment pointing downwards
(Fig. 5).
Fig.5
• To control the sideburns, turn the appliance
and hold it with the trimming attachment
pointing downwards (Fig. 6)
Fig. 6
Cleaning
• Before performing any cleaning operation,
it is absolutely necessary to unplug the
appliance from the mains.
CAUTIoN
: To avoid the danger of
electric shock, do not immerse the
appliance, the charger or the power
cord in water or any other liquid and do
not hold it under running water.
• Always switch the groomer off before
cleaning.
• If cut hair has accumulated in the guide
comb area, remove thm by shaking, blowing
or using cleaning brush provided.
• After use you may wash the precision
trimmer, the full width trimmer and the hair
clipping combs with warm water.
CAUTIoN
: Never wash the micro-
shaving head with water.
CAUTIoN
:
Do not use hot water to
wash the attachments of the groomer.
• Do not use abrasive, scourers or liquids
such as alcohol, benzene, bleach or
acetone to clean the groomer.
• Never clean, replace or remove groomer
attachments with motor on.
• Do not apply pressure to cutters.
• Do not touch cutters with hard objects as
this may damage them.