21
EN
PG-300
Using Nose, Ear & Eyebrow
Attachment
• Be certain that the groomer is switched off.
• Remove the precision trimmer from the
main body by pressing the two side release
buttons.
• Attach the nose, ear, eyebrow attachment
on the main body until it locks into position.
You will hear a “click” sound.
Trimming Nose Hair
• Make sure that the nasal passages are
clean.
• Place nose, ear and eyebrow attachment on
groomer.
• Switch the groomer on and insert the tip of
the attachment into one nostril.
CAUTIoN
: Do not insert the tip more
than 3/16 in. /5mm into your nostril.
• Slowly move the tip in and out while turning
it around at the same time in order to
remove unwanted hair.
• For best results, make sure the side of the
tip is firm against skin. This will reduce the
ticking effect that can occur during trimming
of nose hair.
• Turn off the groomer. Wipe the attachment
clean after each use.
Trimming Ear Hair
• Clean outer area of ear and ear canal. Make
sure it is free of wax.
• Nose, ear and eyebrow attachment should
be attached on the groomer.
• Switch the groomer on and move it softly
around the edge of ear to remove hairs
extending beyond the outer ear.
• Carefully insert the tip into outer ear canal.
CAUTIoN
: Do not insert the tip further
than 3/16 in. /5mm into the ear as this
could cause damage to the eardrum.
• Turn off the groomer. Wipe the attachment
clean after each use.
Trimming Eyebrow
• The nose, ear and eyebrow attachment
should be attached on the groomer.
• Switch the groomer on and use the tip to cut
individual eyebrow hairs.
• The groomer can be used for clipping single
long hairs.
• Put the groomer at the root of the hair and
move it along the edge of the eyebrow from
the base of the nose towards the outer tip of
the eyebrow in the direction of hair growth.
IMpoRTANT
: Do not use the groomer
to define or trim the entire eyebrow.
Do not try to trim your eyelashes. Be
careful not to get too close to your
eyelashes and eyes!
• Turn off the groomer. Wipe the attachment
clean after each use.
Shaving With Micro Shaver
Attachment
• Insert the micro shaver attachment on the
groomer.
• Use the narrow micro shaver to shaver long
contoured edges to remove any stubble
while creating a smooth well-defined beard
line.
• Gently press the micro shaver onto the skin.
Do not press too hard.