Izon qNano, User Manual, Page: 8 / 56

Connecting to a Computer
Devices that can be connected to the equipment should be compliant with a
relevant safety standard such as IEC 60950-1 for IT equipment or IEC 61010-
1 for laboratory equipment and should provide double or reinforced insulation
from hazardous voltage sources. Always use an Izon supplied USB cable to
connect to your instrument.
Computer Minimum Specifications:
— Windows (7 onwards) Professional Edition (64-bit)
— i7 processor (i5 minimum)
— 8 GB RAM
— Dedicated graphics processor and memory (1 GB). Intel HD Graphics 620
or higher on an i7 processor is acceptable
— Hard drive with at least 50 GB free space for software installation and data
— USB port
Windows Home Edition is not suitable for the installation of the Control
Suite software. Ensure that the computer is installed with Windows
Professional Edition.
Install the Izon Control Suite Software (CSS) by inserting the USB drive from
the Training Kit into a computer that meets the minimum specifications. View
the files and double click on “Install.exe”, the installation wizard will then take
you through installing the software.
Once the CSS and instrument are both successfully installed, complete reading
the User Manual and proceed to undertake the training course described in the
“Izon’s TRPS Training Module” PDF document on the USB drive.
General Operating Precautions
Izon Instrumentation is designed for indoor use only and is to be used
within the rated conditions outlined in the system specification table on the
following page.
8 www.izon.com