Izon qNano, User Manual, Page: 24 / 56

During calibration recording, any particles that are significantly outside of the
green zone are assumed to be noise or contamination and are automatically
removed from the calibration calculations.
The green zone for the Relative Particle Speed plot (ms-1) is an indication of
particle velocity through the nanopore (calculated from the blockade duration
of individual particles).
Figure 9. The applied pressure can be altered to optimise the relative particle speed so that
particles fall within the green zone.
If using the classic capture tool, refer to the instrument set-up and signal
optimisation section for advice.
24 www.izon.com