Introduction
1 Introduction
1.1 Overview
With the IXXAT PC/CAN interface iPC-I 165/PCI you have purchased a high-quality
electronic component which has been developed and manufactured according to
the latest technological standards.
The aim of this manual is to help you familiarize yourself with your interface, also
referred to in the following as iPC-I 165/PCI. Please read this manual before be-
ginning with the installation.
1.2 Features
•
Design as PCI board
•
32 bit memory mapped access (needs 16 kBytes memory address space)
•
Base address and PC interrupts via PCI Plug’n Play bios
•
Microcontroller SAB C165 clocked with 20 MHz
•
One ore two CAN circuits with Philips SJA1000 and/or INTEL 82527
CAN controller, clocked with 16 MHz
•
8 kBytes Dual-Port-RAM, 16 semaphore registers
•
512 kByte RAM (optional up to 2 MByte)
•
512 kByte Flash (optional up to 1 MByte)
•
CAN bus connection separate for each CAN controller or combined
•
CAN bus interface according to ISO/IS 11898-2 (optional galvanic decoupled)
•
DeviceNet bus interface optional
•
Customer specific bus interfaces by using a piggyback board
•
Optional CAN protection circuit
•
CAN connection by 9-pin Sub-D connector (male and female)
Copyright IXXAT Automation GmbH
iPC-I 165/PCI - Manual, Version 2.3
5
Summary of Contents for iPC-I 165/PCI
Page 4: ......
