Installation
2 Installation
2.1 Hardware
installation
For all work on the PC and interface, you must be statically discharged. The work
must be carried out on an earthed, anti-static work-mat.
Carry out the following work in sequence:
(1)
Switch the PC off and remove the mains plug.
(2)
Open the PC according to the instructions of the PC-manufacturer and de-
termine a suitable plug-in space.
The interface is designed according to the PC-standard and can be easily
built into the computer. Do not use force when plugging in.
(3)
Ensure that the interface is held safely in place in the PC.
(4)
If your interface is assembled with 2 isolated CAN-circuits, you must fix the
additional slot plate and plug in the header on the interface (see Section
3.2).
(5)
Close the PC; the hardware installation is now completed.
2.2 Software
installation
To operate the interface, a driver is required.
For the installation of the CAN driver VCI under Win9x/Me/NT/2000/XP, please
read the VCI installation manual.
Copyright IXXAT Automation GmbH
iPC-I 165/PCI - Manual, Version 2.3
7
Summary of Contents for iPC-I 165/PCI
Page 4: ......
