IXXAT FlexRay CCM/ FRC-EP150, Hardware Manual

Page: 8 / 33

Copyright IXXAT Automation GmbH
FlexRay CCM Manual, Version 2.4
Installation
8
1.5 Returning hardware
To enable fast, correct processing, please apply for an RMA number before re-
turning hardware using our on-line "RMA form", which you will find in the Sup-
port section on our website.
After applying for the RMA number, you will receive a return delivery note from
us, which you should enclose with the return delivery. If returns are made with-
out an RMA number or a return delivery note, we reserve the right to return the
delivery at your expense. A detailed description of the RMA procedure can be
found in the Support section on our website.
2 Installation
2.1 Hardware installation
Connect the device to the supply voltage and connect it to a PC via Ethernet. Only
the cables of IXXAT may be used to operate the FlexRay CCM, see section "Acces-
sories".
2.2 Software installation
A PC driver is required to operate the device. For installation of the VCI driver un-
der Windows 2000/XP/Vista, please refer to the VCI installation manual.