IXXAT FlexRay CCM/ FRC-EP150, Hardware Manual

Page: 21 / 33

Copyright IXXAT Automation GmbH
FlexRay CCM Manual, Version 2.4
Displays
21
4 Displays
There are six LEDs on the front of the device via which the device and communi-
cation status can be read off.
CAN1
CAN2
FLX
ON
RDY
ETH
LED Color / type Function
ON
Power
OFF Device is off, no power supply
GREEN flashing
(const. frequency) Device is in Standby mode (wake-up with activity on Ethernet or bus)
GREEN Device is in active state
RDY
OS Ready
OFF Boot loader not running (error)
YELLOW flashing
(const. frequency) Boot loader running, the device is being initialized or is waiting for an
Ethernet connection
YELLOW Application running, no Ethernet-Link pulse
GREEN flashing
(const. frequency) Application running, with Ethernet-Link pulse
GREEN Application running, Ethernet connection to PC was set up
YELLOW/GREEN
blinking Stand-alone application running
ETH
Ethernet
OFF No Ethernet data
YELLOW flickering
(data frequency) Ethernet data
CAN
(2 LEDs)
OFF During start or boot-up: boot manager or application not running
(error)
In operation: waiting for CAN data (no CAN data traffic)
RED flashing
(const. frequency) CAN controller is not configured (boot manager or application run-
ning)
RED/GREEN flash
alternately FLASH loader for CAN running
GREEN flashing
(const. frequency) CAN controller is configured and waiting for start.
GREEN flickering
(data frequency) Normal CAN operation, CAN data traffic running
RED flickering
(data frequency) Faulty operation (CAN Error-Warning bit is set)
RED Communication failure (Bus Off)
FLX
FlexRay
OFF Boot manager or application not running (error)
RED flashing
(const. frequency) FlexRay Communication Controller is not configured
(boot manager or application running)