IXXAT FlexRay CCM/ FRC-EP150, Hardware Manual

Page: 15 / 33

Copyright IXXAT Automation GmbH
FlexRay CCM Manual, Version 2.4
Connections
15
3.1.6 Trigger/Digital-Out connector (TRIG-OUT)
The 4 Trigger/Digital-Output signals are connected to the Trigger-Out connector.
Pin Signal
1
2
3
4 5
6
7
8
1 Trigger 1
2 Ground (Trigger out)
3 Trigger 2
4 Ground (Trigger out)
5 Trigger 3
6 Ground (Trigger out)
7 Trigger 4
8 Ground (Trigger out)
Table 3-7: Pin assignment of the TRIG-OUT connector
The Trigger output is galvanically isolated from the other interfaces.
A suitable trigger cable is available for the Trigger outputs. See section "Accesso-
ries".
3.1.7 Trigger-In connector (TRIG-IN)
The 2 Trigger input signals are connected to the Trigger-In connector.
Pin Signal
1
2
3
4 5
6
7
8
1 Trigger 1
2 Ground (Trigger in)
3 Trigger 2
4 Ground (Trigger in)
5-8 Not used
Table 3-8: Pin assignment of the TRIG-IN connector
The Trigger-In is galvanically isolated from the other interfaces.
A suitable cable is available for the Trigger inputs. See section "Accessories".