RAMSES RT 2500 S Universal – User Guide
VI.5.2
S
ETTING THE
C
OMMUNICATION
P
ORT
The first thing that you have to do to configure the RT961B2S-Mk2 remote control MMI is
to set up the USB communication port through which the data are going to be transferred.
Figure 19 – Selection of the Communication Port
Before connecting the transponder, you have already a list of communication port in the
scrolling list. When you connect the transponder, a new communication port is added to
the list. Check before connecting the transponder which com ports are already present to
be able to choose directly the right com port once you have connected the transponder.
Step Action
1.
Run the RT961B2S-Mk2 MMI application.
2.
Select the appropriate port number from the scrolling list in which the RT961B2S-Mk2
serial link is connected.
The software looks automatically to connect itself to the RT961B2S-Mk2. Then, the MMI
opens the RT961B2S-Mk2 Setting tab and the data fields are filled.
3.
End of procedure.
To have access to the general status parameters, open the
General Status
tab.
Procedure
MU – RT961SMk2 – AN - 001- A – June 2010
29
Summary of Contents for RAMSES RT 2500 S Universal
