RAMSES RT 2500 S Universal – User Guide
VI.6.1.2 Displaying the Current Voltage
The
Diagnostic
button is used to control the voltage of the battery with the MMI software.
If you click again, the voltage is measured and displayed again.
Procedure
Step Action
4.
Click on the
Diagnostic
.
The RT961B2S-Mk2 returns:
The current battery voltage (in V) when the transponder is not being charged or the
charging voltage (in V) when the charger is connected and is externally powered.
5.
Press
OK
to close the
Command Utility
window.
6.
End of procedure.
VI.6.1.3 Displaying the Current Pressure (Optional)
•
The
Telemetry
button is provisional for monitoring the pressure data if the RT961B2S-
Mk2 transponder is equipped of a pressure sensor. The
Telemetry
button is disabled
(grayed) if there is no pressure sensor.
•
Click on the
Telemetry
button to display the pressure measurement in the
Command
Utility
window.
VI.6.1.4 Setting ON the Pinger Mode
The
Pinger ON
button allows the activation of the pinger mode with the parameters set up
in the MMI software. See section 0. Once you have clicked on the
Pinger ON
button, it
turns into a
Pinger OFF
button to allow you to stop the pinger mode.
MU – RT961SMk2 – AN - 001- A – June 2010
39
Summary of Contents for RAMSES RT 2500 S Universal
