RAMSES RT 2500 S Universal – User Guide
V.1.3 C
HECKING THE
A
COUSTIC
L
INK
This last test of operation before deployment consists in checking the good operation of
the acoustic link between the remote control unit and the transponder.
Procedure
Step Action
1.
First initialize the surface remote control equipment and the receiver mode as indicated
in the corresponding User Manual.
2.
See individual Factory Acceptance Test or the label stuck on the main body of the
transponder.
3.
Transmit the ARM+ARM code and check for indication of receipt from the remote control
unit.
4.
End of procedure.
If the reception on the remote control unit fails, check the code(s) and repeat the
procedure.
Failure
The Release Transponder is now ready to be used. The mooring can be deployed in the
water. The next section concerns the recovery of this mooring.
Success
MU – RT961SMk2 – AN - 001- A – June 2010
20
Summary of Contents for RAMSES RT 2500 S Universal
