manualshive.com logo in svg

IWILL VD133, Manual, Page: 78 / 80

Share
Download
IWILL VD133 Manual Download Page 78

78

VD133 Pro Series

Chapter 6 Power Installer CD

6.2.4  How to install VIA Service Pack(4 in 1. EX: Bus Master,

ACPI, IRQ, AGP)

Simply click on the software shown on screen that needs to be installed, then simply
follow the messages displayed on the screen to complete setup.

Simply click on the software shown on screen that needs to be installed, then simply
follow the messages displayed on the screen to complete setup.

6.2.5 How to install Award Patch File Driver

You may just click on the 

Award Patch File

 

Driver

 shown on screen that needs to be

installed, then follow the prompts to complete setup.

6.2.6 How to install Software Audio Driver

You may just click on the 

Software Audio Driver

 shown on screen that needs to be

installed, then follow the prompts to complete setup.

6.2.7 How to use Anti-Virus program

Simply click on the

 Anti-Virus

 shown on screen that be installed, then follow the

prompts to complete setup.

6.2.8 How to use Hardware Monitoring Utility(Window 9X only)

You may just click on the 

Hardware Monitor Utility

 shown on screen then follow the

prompts to complete setup.

Summary of Contents for VD133

















































































Reviews:

No comments