IWILL VD133, Manual, Page: 40 / 80

40
VD133 Pro Series
Chapter 4 Haredware Setup
4.7.5 Front Panel Connector (J43)
This connector is composed of all the headers that may be connected to the front
panel of the chassis.
4.7.5.1 Power/Soft-Off Connector (PWR_ON)
The system power is controlled by a momentary button connected to this
connector. Pressing the button once will switch the system between ON
and OFF. Pushing the button for more than 4 seconds will turn the system
off.
4.7.5.2 ACPI LED Connector (ACPI)
This 2-pins connector is for a ACPI power status indicator. The LED status
will depend on the connector.
4.7.5.3 IDE LED Connector (ALED)
This 2-pin connector connects to the case-mounted IDE LED, which lights
when the IDE devices connected to the primary / secondary IDE connectors
are working.
4.7.5.4 Reset Connector (RST)
This 2-pin connector connects to the case-mounted reset button for
rebooting your computer without having to turn off the power supply.
4.7.5.5 System Power LED Connector (PLED)
This 3-pin connector connects to the case-mounted system power LED,
which lights when the system is powered on.
4.7.5.6 Speaker Connector (SPKR)
This 4-pin connector connects to the case-mounted speaker.